JM audio J&M ROKKER® XXR 7.25” Fairing Speaker Kit for 1998-2013 Harley® RoadGlide

Brand: JM audio , Category: Audio


J&M’s ROKKER XXR series 7.25” drivers are the largest diameter speakers that can be installed into the Harley RoadGlide style fairing, with cone volume and mass comparable to a 6X9” speaker.

Spec’d at 2 ohms impedance and an impressive 217 watts maximum input (165w RMS continuous - 92db sensitivity), these new speakers provide the ultimate in raw audio power.

This custom speaker installation kit has been designed specifically for the 1998-2013 Harley® RoadGlide Fairing.

Important Note 1: For 1998-2005 RoadGlide fairings updated speaker plate adapters will be needed as an extra cost item, J&M part# RRPA-RGSPA or Harley part#’s 77021-98B & 77022-98B, and in addition, this speaker kit is NOT compatible for direct connection to the 1998-2005 Harley RSI factory radio system, without connecting an amplifier between the RSI radio and the speakers).

Important Note 2: 2012-2013 CVO RoadGlides come from Harley with smaller 5X7” stock fairing speakers installed. Therefore, to install the custom J&M ROKKER XXR series 7.25” speakers into the fairing, you will need to obtain updated speaker plate adapters, J&M part# RRPA-RGSPA or Harley part#’s 77021-98B & 77022-98B, along with J&M speaker spade wire adapter kit, J&M part# HSWA-2301, for a clean no-modification install.

Features of this new ROKKER XXR series speaker kit from J&M are:

* Lightweight waterproof one-piece polycarbonate driver cone with super-rigid metal basket design.

* High-density lite-weight Neodymium magnet structure, specially coated to maintain flux-strength integrity even at extreme operating temperatures.

* High efficiency VENTED voice-coil for improved cooling when operating at high volume levels for extended periods.

* Custom speaker grills with high-output tweeter & midrange for crystal clear sound at highway speeds.

* Top-quality adapter rings/bracket hardware for secure and clean mounting into the fairing. 

* Mounting hole pattern and spade electrical connections are exactly the same as the factory specification, this is a total plug-and-play no-modification solution complete with easy to follow installation instructions.

These are THE most powerful speakers you can buy for your Harley and they will perform extremely well when used with a medium to high-powered accessory amplifier.